Formply plywood and formply nz for formply nelson
Formply plywood is one kind high quality formwork use plywood.
Formply is a high-quality plywood produced with FSC certified hardwood timber veneers.
These are glued with phenol formaldehyde resin and overlaid with a hard durable resin impregnated paper to give concrete a smooth finish.
With a durable A-Type Marine bond, ROCPLEX Formply can withstand the rigours of construction moisture.
Its hard phenolic surface and high-quality outer veneers make it durable and reusable.
ROCPLEX Formply has a cross-laminated construction and is less likely to expand or contract when exposed to rain and temperature changes, making it easier to lay forms for large decks
Can be used on steel or timber form frame systems
ROCPLEX Formply Nelson TECHNICAL PROPOSAL FOR ITS USE
• Tulsa Standard Film panels are edge sealed during manufacturing. If you have to cut during use, it is
recommended that the fresh edges be re-sealed to avoid panel damage caused by capillary penetration of
• Always use the correct recommended chemical reactive releases for non-porous surfaces to insure best form
• Although cleaning a Tulsa overlay panel is much easier and quicker than traditional form material, it is important to
only use fiber spatulas and synthetic materials when cleaning forms to prevent damages to the faces, which might
occur with metallic tools.
• Although Tulsa overlay panels are very resistant to the abrasion and impact, as with any highly finished surface,
care must be taken during cleaning and use to prevent damage. Always use the appropriate vibrators and
techniques to protect the panel surface.
ROCPLEX Formply Nelson Standard Film
ROCPLEX Formply Nelson SIZES
12 mm = 15 / 32’’
15 mm = 19 / 32’’
17 mm = 23 / 32’’
Formply Plywood Dimensions:
Width 1,20 mt = 4’’
Length 2,40 mt = 8’’
During manufacturing, panel humidity is controlled and stabilized to 8%.
Any news about formply plywood,formply nz,formply nelson, please take a look at ROCPLEX affiliate line:
or contact us directly : firstname.lastname@example.org