CDX Pine Plywood
ROCPLEX CDX Pine Plywood
ROCPLEX CDX Pine Plywood is manufactured using high-quality pine veneers arranged in cross-laminated layers. This method enhances strength, minimizes warping, and improves load distribution under structural stress.
The panel is bonded with weather-resistant resin that meets CDX grading for exterior exposure. It performs well in roof sheathing, wall bracing, and subfloor installations where occasional moisture may occur but direct water exposure is limited.
Each board is classified with a “C” face and “D” back, reflecting the surface grading for non-decorative structural applications. The face may include limited knots and patches, while the back may contain open defects within allowable tolerances.
ROCPLEX controls production through precision calibration and adhesive application to ensure stable thickness and bond integrity. BDX-level internal grading reflects enhanced manufacturing quality for consistent field performance.
The product is available in common sheet sizes and various thicknesses to meet different code requirements and framing systems. Panels can be supplied with square or tongue-and-groove edges as needed.
＞＞＞
ROCPLEX CDX Pine Plywood Standard Sizes
| Thickness (mm) | Length(mm) | Width (mm) | Type | Grade |
| 4 | 2440 | 1220 | Pine | BDX / CDX |
| 7 | 2440 | 1220 | Pine | BDX / CDX |
| 9 | 2440 | 1220 | Pine | BDX / CDX |
| 12 | 2440 | 1220 | Pine | BDX / CDX |
| 15 | 2440 | 1220 | Pine | BDX / CDX |
| 17 | 2440 | 1220 | Pine | BDX / CDX |
| 18 | 2440 | 1220 | Pine | BDX / CDX |
| 19 | 2440 | 1220 | Pine | BDX / CDX |
| 25 | 2440 | 1220 | Pine | BDX / CDX |
| 28 | 2440 | 1220 | Pine | BDX / CDX |
＞＞＞
ROCPLEX Pine Plywood Type
＞＞＞
ROCPLEX Pine Plywood Grade
＞＞＞
ROCPLEX CDX Pine Plywood Specifications
| Veneer Thickness | Finish | ||||||||||||
| Constant through the product thickness | Well Sanding | ||||||||||||
| Joints | Bond | ||||||||||||
| Full sheet / Scarf and / or butt jointed | / | ||||||||||||
| Moisture Content | Adhesive | ||||||||||||
| 8% – 15% (at time of despatch) | E0 E1 |
||||||||||||
| Dimensional Tolerances | Density | ||||||||||||
| Available on request | 530-720 kg/m³ (approximately) | ||||||||||||
| Straightness | Certified | ||||||||||||
| Available on request | FSC / PEFC / CE / CARB | ||||||||||||
| Storage | Branding | ||||||||||||
| Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation | Each pallet of ROCPLEX plywood is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards |
＞＞＞
ROCPLEX CDX Pine Plywood Features & Benefits
- Strong Structural Performance
- Designed to meet framing and sheathing load demands in roofing, flooring, and bracing.
- Weather-Resistant Bonding
- Water-resistant adhesive provides short-term exposure protection in outdoor or humid environments.
- Cross-Laminated Core Strength
- Enhances panel stiffness and reduces expansion, shrinking, and warping under pressure.
- Rough Utility Face and Back
- C/D grading suits non-visual applications while maintaining strength and fastening compatibility.
- Multiple Thickness Options
- Available from 6mm to 25mm to suit various structural designs and local code compliance.
- Cost-Effective Construction Solution
- Balances durability and affordability, making it ideal for large-volume construction use.
＞＞＞
ROCPLEX CDX Pine Plywood Certified By
 |  |  |  |
ROCPLEX CDX Pine Plywood is widely used in residential and commercial roof and wall sheathing, offering durable backing for shingles, siding, or other coverings.
It performs reliably in flooring systems where subfloor support is required under carpet, hardwood, or tile finishes.
This plywood is used for temporary site hoarding, bracing panels, and crates where structural stability is essential but finish appearance is not critical.
The weather-resistant glue line allows limited outdoor exposure during construction without compromising board integrity.
Looking for reliable sheathing panels that perform on site? Contact ROCPLEX now for CDX Pine Plywood engineered to meet your framing and weather-resistance needs.
＞＞＞
ROCPLEX CDX Pine Plywood FAQ
Q: What is CDX Pine Plywood?
A: CDX Pine Plywood is a construction-grade panel made from pine veneers, bonded with exterior-grade adhesive. It is rated for structural use with limited weather exposure.
Q: What are typical uses for ROCPLEX CDX Pine Plywood?
A: It is used in roof sheathing, wall bracing, subfloors, crates, and temporary site enclosures in both residential and commercial projects.
Q: What sizes and thicknesses are available?
A: ROCPLEX CDX Pine Plywood is produced in 1220mm × 2440mm sheets, with thickness options from 3mm to 28mm.
Q: What does “CDX” stand for?
A: “C” and “D” refer to the front and back veneer grades, while “X” indicates the panel is bonded with moisture-resistant glue for exterior applications.
Q: How can I request technical data or pricing?
A: Contact the ROCPLEX sales team via email or website to request datasheets, certifications, or a detailed quote.
