UV Prefinished Plywood
ROCPLEX UV Prefinished Plywood
ROCPLEX Prefinished Plywood is manufactured using high-quality core veneers topped with a UV-cured clear coat. The coating is applied on advanced finishing lines that expose the surface to ultraviolet light, curing the top layer to a smooth, hardened state.
This process eliminates the need for sanding, priming, or painting, saving valuable time during fabrication and installation. The finish is consistent, clear, and resistant to abrasion, making it suitable for visible interior surfaces.
The panels are built with precision-calibrated plywood cores, ensuring dimensional accuracy and stability. ROCPLEX controls core quality to minimize warping, edge cracks, and surface irregularities that affect final appearance.
UV curing also enhances the product’s environmental safety. The coating contains low VOCs and complies with global indoor air standards. The surface is easy to clean and maintains clarity and gloss even with frequent use.
Available in single- or double-sided coated versions, ROCPLEX Prefinished Plywood supports a wide range of applications in interior finishing and furniture manufacturing.
＞＞＞
ROCPLEX UV Prefinished Plywood Standard Sizes
| Thickness (mm) | Length(mm) | Width (mm) | Type | Grade |
| 4 | 2440 | 1220 | UV Prefinish | AA |
| 7 | 2440 | 1220 | UV Prefinish | AA |
| 9 | 2440 | 1220 | UV Prefinish | AA |
| 12 | 2440 | 1220 | UV Prefinish | AA |
| 15 | 2440 | 1220 | UV Prefinish | AA |
| 17 | 2440 | 1220 | UV Prefinish | AA |
| 18 | 2440 | 1220 | UV Prefinish | AA |
| 19 | 2440 | 1220 | UV Prefinish | AA |
| 25 | 2440 | 1220 | UV Prefinish | AA |
| 28 | 2440 | 1220 | UV Prefinish | AA |
＞＞＞
ROCPLEX UV Prefinished Plywood Type
＞＞＞
ROCPLEX UV Prefinished Plywood Grade
＞＞＞
ROCPLEX UV Prefinished Plywood Specifications
| Veneer Thickness | Finish | ||||||||||||
| Constant through the product thickness | UV | ||||||||||||
| Joints | Bond | ||||||||||||
| Full sheet / Scarf and / or butt jointed | / | ||||||||||||
| Moisture Content | Adhesive | ||||||||||||
| 8% – 15% (at time of despatch) | E1 |
||||||||||||
| Dimensional Tolerances | Density | ||||||||||||
| Available on request | 530-720 kg/m³ (approximately) | ||||||||||||
| Straightness | Certified | ||||||||||||
| Available on request | FSC / PEFC / CE / CARB | ||||||||||||
| Storage | Branding | ||||||||||||
| Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation | Each pallet of ROCPLEX plywood is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards |
＞＞＞
ROCPLEX UV Prefinished Plywood Features & Benefits
- Factory-Applied UV Coating
- Eliminates on-site finishing and offers high surface uniformity with strong abrasion resistance.
- Time and Labor Saving
- Ready to install upon delivery, reducing jobsite preparation and material handling.
- Low Emission and Eco-Friendly
- Complies with CARB and E0 formaldehyde standards; UV finish emits almost zero VOCs.
- Excellent Surface Hardness
- Protects against scratches, stains, and wear in high-contact interior applications.
- Available in Multiple Options
- Offered in single- or double-sided coating and various core combinations.
- Precision-Manufactured Core
- ROCPLEX plywood cores are dimensionally stable and offer smooth edges for accurate cutting.
＞＞＞
ROCPLEX UV Prefinished Plywood Certified By
 |  |  |  |
ROCPLEX Prefinished Plywood is ideal for high-end cabinet interiors, drawer components, and shelving where smooth surfaces are required.
It’s commonly used in closets, wardrobes, storage systems, and vanities where fast, clean installation is a priority.
In interior architecture, it serves as a wall cladding solution for commercial and residential projects that require uniform finishes.
Retail displays, fixture panels, and office furniture also benefit from the board’s pre-applied finish and scratch-resistant surface.
Looking for a high-quality panel with a ready-to-use surface? Contact ROCPLEX now for Prefinished Plywood designed for efficiency and elegance.
＞＞＞
ROCPLEX UV Prefinished Plywood FAQ
Q: What is UV Prefinished Plywood?
A: UV Prefinished Plywood is a panel with a factory-applied UV coating. It provides a ready-to-use, durable surface for interiors and furniture.
Q: Where is Prefinished Plywood typically used?
A: It’s commonly used in cabinet interiors, drawer sides, closet walls, shelving, and decorative panels in residential and commercial spaces.
Q: Is the surface safe for indoor use?
A: Yes. The UV coating is low in VOCs and meets E0 and CARB standards, making it safe for interior environments.
Q: Is it available in both sides coated?
A: Yes. ROCPLEX offers panels with UV coating on one or both sides, depending on the intended application.
Q: What sizes and thicknesses are available?
A: Standard size is 1220mm × 2440mm. Thicknesses range from 3mm to 18mm. Single- or double-sided coating options are available.
